Zenith Presentation H27E46DT, Инструкция по установке и эксплуатации, Гарантия

Страница: 19 / 60

P A G E 1 9
206-3602
VIDEO
ANTENNA
CABLE
R- AUDIO- L
S-VIDEO IN
COMPUTER
AUDIO
R
L
AUX IN
M.P.I.
TV Back
R- AUDIO- L
R- AUDIO- L
S-VIDEO OUT
COMPUTER
IN
AUDIO OUT
S-Video cable
not included
with TV
Audio Out S-Video Out
3 4
VCR Back
VCR Back AV Panel
output
switch
R L
Connect Audio Out
to an external
amplifier and
speakers.
Your Zenith TV may be connected to a Super-VHS VCR through the S-Video
Input located on the connection panel on your TV. Also, you may “daisy
chain” up to five TVs to one Super VHS VCR through the special S-Video
LOOP OUT connection.
Hook up your S-VHS VCR to the Zenith TV
according to the diagram at the right.
Remove the back of the remote and put in two
AAA batteries.
Plug in your TV. The Zenith TV is
designed to operate on standard
current, 120-volt 60 Hertz AC.
Do not attempt to operate it on
DC Current.
If you wish to “daisy chain” more than one TV
to receive the S-VHS signal, you will need to
make the following connections with an S-Video
cable, inserting one end of the cable into the
LOOP OUT port with the other end inserted into
a S-Video In port of the second Zenith TV or
equivalent input for any other brand of TV.
1
2
3
4
4
Back of
Remote
Hook Up an S-VHS VCR to your TV