804050NZ- CS Commercial HydroTap - Installation Instructions - 09.2016 v3.01
Page 3 of 20
HydroTap Specifications
Installation check list .................................................................................................................... 4
Important Safety Instructions ....................................................................................................... 5
Warnings and Regulatory Information .......................................................................................... 6
Major components and Accessories ............................................................................................ 7
Technical Specification ................................................................................................................ 8
Before Installation and site requirements ..................................................................................... 9
STEP 1 -
Measure and cut all the tap holes before fitting the taps
Section 1 - See Tap Installation instructions, (supplied with the tap ) No. 803341NZ
STEP 2 -
Check for adequate ventilation
Section 2 - Ventilation
2.1 - Ventilation - All Models ............................................................................................. 10
2.2 - Ventilation diagram - CS Models .............................................................................. 10-11
2.3 - Alternative Ventilation ............................................................................................... 11
STEP 3 -
Fit the CO
2
Gas cylinder
Section 3 - CO
2
Cylinder and Regulator
3.1 - Connect, secure and test the CO2 gas cylinder ....................................................... 12
3.2 - Connect the regulator ............................................................................................... 12
3.3 - Connect the gas hose to the regulator ...................................................................... 12
STEP 4
-
Install the underbench unit
Section 4 - Underbench unit installation
4.1- Hose and Tube fittings ; J.G. Fittings ......................................................................... 13
CO
2
regulator .................................................................................................................... 14
4.2- Connect the gas hose to the undersink unit ............................................................... 15
4.3- Test for gas leaks ....................................................................................................... 15
4.4- Installation and connection ........................................................................................ 15
4.5- Chilled Sparkling Models CS175 ............................................................................... 16
4.6- Celsius Chilled Sparkling Model CSHA175 ............................................................... 17
STEP 5
-
Commission the HydroTap
Section 5 - Commissioning
5.1- CO
Purge .................................................................................................................. 18
5.2- Filter Flush ................................................................................................................. 18-19
Trouble Shooting
Trouble Shooting Table ................................................................................................................ 19
End of life disposal ....................................................................................................................... 19
Contact details ............................................................................................................................. 20
Index