manualshive.com logo in svg

Zenith HydroTap G5 UltraCare BCU 40, Руководство пользователя

Поделиться
Скачать
Zenith HydroTap G5 UltraCare BCU 40 Скачать руководство пользователя страница 38

807041NZ v1.00 03.21 HydroTap G5 UltraCare User guide

38

Sanitisation of the system is recommended at least 
every 12 months as part of regular maintenance, 
following replacement of the chilled water hose.

Equipment required:
95235NZ In-Field HydroTap Sanitisation kit

 (can be 

re-used for all Services), containing:
•  Sanitising canister and holder
•  Hose and check valve
•  Disposable gloves
•  Chlorine test strips
•  Filter plugs (Micropurity, Everpure, 3M)

Safety information

•  Refer to the safety data sheet (SDS) for chemical 

handling of the CleanOxide tablets.

•  Wear disposable gloves and protective eyewear
•  If the sanitising fluid contacts your skin, wash off with 

soap and water.

•  If the sanitising fluid contacts your eyes, flush 

continuously with fresh water.

•  Sanitising fluid will remove colour. Clean any spill 

immediately with fresh water.

 SECTION 4: User maintenance

4.7 In-field sanitisation

Содержание HydroTap G5 UltraCare BCU 40













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды