Zenith C13A03D, Инструкция по эксплуатации

Страница: 39 / 59

P A G E 4 0
206-3643
PRG POWER
CABLE
VCR
AUX TV
SURF
ENTER
FLASHBK MUTE
CHANNEL
CHANNEL
VOLUME VOLUME
1 2 3
4 5 6
7
0
8 9
MENU
REWIND FFWD
RECORD
QUIT
A
B
C
CC
TV/VCR
SOURCE
PAUSE TIMER
PLAY
STOP
5/7
3
6
2
4
Indicator Light
Remote Control Auto-Find
1
2
3
4
5
6
7
You can quickly get out of Auto Find by pressing QUIT.
If the indicator light stays on while you push Power, instead
of turning off, all the codes have been tried and the device
can’t be programmed.
If Programming the Remote did not find your code, try this procedure to automatically find the code
for your device. If your remote becomes inoperable, go back to “Programming your Remote” and
enter the Zenith TV code for step five
Turn on the device you want the remote to control.
Press and hold PRG until the indicator light turns on,
then release PRG.
Press the key for the device you are trying to pro-
gram (CABLE, VCR, AUX, TV).
Press 0-0-0 (zero-zero-zero), then press ENTER right
away.
Point the remote at the correct device and push the
POWER key (The indicator light will turn off while
the POWER key is pressed). Allow a second to pass,
then push the POWER key again. Repeat until the
device turns off.
Push ENTER to save the code (The indicator light will
flash 3 times and then turn off).
Press POWER to turn the device back on.