Zenith C13A03D, Инструкция по эксплуатации

Страница: 36 / 59

P A G E 3 7
206-3643
PRG POWER
CABLE
VCR
AUX TV
SURF
ENTER
FLASHBK MUTE
CHANNEL
CHANNEL
VOLUME VOLUME
1 2 3
4 5 6
7
0
8 9
MENU
REWIND FFWD
RECORD
QUIT
A
B
C
CC
TV/VCR
SOURCE
PAUSE TIMER
PLAY
STOP
Programming your Destination II PC/TV remote will allow
you to use one remote to work up to 7 different devices!
Not all devices will work with your remote control.
1
2
3
4
5
6
7
Indicator Light
6
7
4
5
Programming the Remote
Program your remote to control a variety of A/ V devices
Mode / Product Compatibility
TV VCR CATV AUX (AUX+1, AUX+2, AUX+3)
TVs VCRs Cable Boxes, All products on pp 41 - 42
Satellite Receivers
3
Turn on the device you want to program.
On the charts on pages 41 and 42, find the type of
device you’re programming, and then find the
brand name. Make a note of the three-number
code(s).
Press and hold PRG. It’s recessed so it doesn’t get
pushed accidentally. Use a small, blunt object.
When the indicator light turns on, you can release
PRG.
Push the key name with the type of device you’re
programming (VCR, CABLE, AUX, TV).
Using the NUMBER keypad, enter the three-number
code you found on pages 41 or 42.
Press ENTER to save the code. (The indicator light
will flash 3 times, then turn off to indicate the
code is valid.)
Point the remote at the device and push POWER. It
should turn off. If not, try the other codes listed
and continue from step three.
Note: To reset remote to factory settings, enter
9-1-1, in Step 5.