Zenith ABV341 Series, Руководство по обслуживанию

Страница: 106 / 190

5-2
DECK MECHANISM DISASSEMBLY
1. Holder Clamp (Fig. 5-1)
1) Release 1 Screws(S1).
2) Unhook 2 Locking Tabs(L1).
3) Lift up the Clamp Holder and then separate it from the
Base Main.
1-1. Disc Clamp Assembly
1) Place the Disc Clamp Assembly as Fig. (A)
2) Lift up the Disc Clamp Assembly in direction of
arrow(A).
3) Separate the Disc Clamp Assembly from the Clamp
Holder.
1-1-1. Clamp Plate
1) Turn the Clamp Plate to counterclockwise direction and
then lift up the Clamp Plate.
1-1-2. Magnet Clamp
1-1-3. Upper Clamp
2. Tray Disc (Fig. 5-2)
1) Insert and push a Driver in the emergency eject
hole(A) at the right side, or put the Driver on the
Lever(B) of the Gear Emergency and pull the Lever(B)
in direction of arrow so that the Disc Tray is ejected
about 15~20mm.
2) Pull the Disc Tray until it is separated from the Base
Main completely.
(S1)
(L1)
(L1)
(Fig. A)
(A)
CLAMP HOLDER
DISC CLAMP ASSEMBLY
CLAMP HOLDER
MAIN BASE
CLAMP HOLDER
PLATE CLAMP
MAGNET CLAMP
UPPER CLAMP
(A)
(B)
DISC TRAY
EMERGENCY EJECT HOLE
LEVER
MAIN BASE
MAIN BASE
BOTTOM SIDE VIEW
Fig. 5-1 Fig. 5-2