21
6.1.4 Ceiling floor models
Dismantle the front panel and the filter following diagram A
Open the return grid by pulling it towards you on each side
Pull filters upwards to remove.
On some models, filters can be removed without dismantling the front panel
6.1.5 Console models
6.2 Cleaning the filters
Clean the filters with a vacuum cleaner (fig. 1) or with tepid soapy water (fig. 2).
Rinse filters with clear water and dry them in a temperate ambience (do not dry in the sun or
near a fire).
Replace filters by following the dismantling instructions in reverse.
Ensure that the filters are repositioned as prior to dismantling; for the PLASMA filter, make sure
that each end is fully engaged in its housing to prevent deficient electrical contact.