20
6. MAINTENANCE
IMPORTANT: before cleaning the indoor unit, ensure that the product is switched off.
Use a dry, clean cloth to clean the plastic parts of the indoor unit and the infrared remote control.
A lightly dampened cloth can be used to clean the indoor unit if it is very dirty.
Do not use a damp cloth to clean the remote control.
Do not use anti-dust products as these may affect the plastic parts.
Do not use solvents, petrol or any other petrol derivative or corrosive chemical products or any
products containing polishing powders
6.1 Dismounting and cleaning the filter :
6.1.1 Wall mounted model
Lift up the
Unclip the filters
Remove
front panel
from their fixings
the filters
6.1.2 Cassette model
Dismantling the front panel and the filter following diagrams A and B :
Open the front grille by pushing in the 2 tabs as shown in diagram A.
Disconnect the electric cable from the holding panel
Dismantle the front grille as shown in diagram B.
6.1.3 Duct model
In the case of assembly with air inlet grille (option) :
Open the front grille by pushing in the 2 clips as shown.
Disconnect the electric cable from the holding panel
Dismantle the front grille as shown.