13
Dehumidification mode (DRY)
This mode dehumidifies the air in the room.
Press the MODE button to select the dehumidification (DRY) mode.
Select the set temperature by pressing the TEMP
or TEMP button.
Press the FAN button to select the most appropriate fan speed: automatic speed, LOW
(slow speed), MED (medium speed), HIGH (high speed).
Press the ON/OFF button, the operating indicator will appear on the remote control and the
"OPERATION" indicator on the indoor unit display panel will stop flashing:
The product is now operating in dehumidification mode.
The fan speed is pre-set by the product to low (LOW FAN).
To stop the product, press the ON/OFF button again.
Note
To limit the effect of the dehumidification mode on the room temperature, the product alternates the cooling
(COOL) mode with the fan only (FAN) mode.
3.5.4 Selecting fan speed
By pressing the FAN SPEED button on the remote control, the fan speed of the indoor unit
can be selected in the following order: automatic speeds -> LOW (low speed) -> MED
(medium speed) -> HIGH (high speed) -> back to automatic speed-> Etc.
For models SPI, press the “SILENCE” button to select the very low fan speed.
3.5.5 Programming ‘TIMER’ (R51M/E)
Automatic start programming function
When the product is stopped, this function enables the user to programme the time at which
the product will start up
Press the TIMER ON button once
TIMER ON appears on the remote control; the letter "h" appears next to the value 0.0
which indicates the countdown in hours and minutes before the product will start operating.
Then press the TIMER ON button several times, the length of time before starting will
increase in increments of 30 mins until 10h, then in increments of 1hour until 24h.
A half-second after depressing the TIMER ON button (once the desired length of time
before starting has been set) the remote control sends the start programme command to
the product (for remote controls R11HG/E and R05/BGE, press OK to validate the timer
setting)..
The TIMER ON message and the operating indicator remain displayed on the remote
control indicating that a start programme is active, the set temperature is once again
displayed after a few seconds and the "TIMER" programming indicator of the indoor unit
display panel is shown.
Automatic stop programming function
When the product is operating, this function enables the user to programme the time at which
the product will stop operating.
Press the TIMER OFF button once.
TIMER OFF appears on the remote control; the letter "h" appears next to the value 0.0
which indicates the countdown in hours and minutes before the product will stop operating.
Then press the TIMER OFF button several times, the length of time before stopping will
increase in increments of 30 mins until 10h, then in increments of 1hour until 24h.
A half-second after depressing the TIMER OFF button (once the desired length of time
before starting has been set) the remote control sends the start programme command to
the product (for remote controls R11HG/E and R05/BGE, press OK to validate the timer
setting).
The TIMER OFF message and the operating indicator remain displayed on the remote
control indicating that a stop programme is active, the set temperature is once again
displayed after a few seconds and the "TIMER" programming indicator of the indoor unit
display panel is shown.