11
3.4
LCD display on the remote control
Type : R51
Type : R06
1 Infrared transmission indicator
This indicator appears when the remote control transmits a signal to the receiver.
The receiver then emits a BEEP to acknowledge the signal.
2 Operating mode indicator
An index allows the user to view the operating mode selected:
AUTO = Automatic
COOL = Cooling
DRY
= Dehumidifying
HEAT = Heating
FAN
= Ventilation (Remote controls R05 and R11)
3 Locked indicator
The locked indicator appears when the buttons are disabled.
4 Programming indicator
The programming indicator appears in this zone:
"TIMER ON" is indicated if the product is programmed to start at a certain time.
"TIMER OFF" is indicated if the product is programmed to stop at a certain time.
"TIMER ON OFF" is indicated if the start and stop times are both programmed.
If there is no indication, then no start or stop time has been programmed.
5 Fan speed indicator
An index allows the user to view the fan speed selected:
LOW
= Low speed
MED
= Medium speed
HIGH = High speed
AUTO = Automatic speed (Remote controls R05 and R11)
If there is no indication, then the fan speed is set to automatic (Remote control R11).
6 Digital display
Deux chiffres indiquent dans cette zone la température de consigne sélectionnée.
7 Operational indicator
This icon appears when the appliance is operating.
8 Economic mode indicator
This pictogram is displayed when the unit is in running in economic mode.
9 Time indicator
4-digit display of current time.
10 Sensor indicator
This pictogram is displayed when the unit regulate by the remote controller sensor.
Type R05