26
A100K11211
SIP Master Stations Configuration
5 Station Indication LEDs
5.1 Station LED
LED4 - Red 5mm LED on board rear side, also seen through front plate.
Flashing at 1 second intervals
- Station has no connection to the SIP server.
Possible reasons:
- No connection to Ethernet
- Wrong SIP server IP address configured
- Invalid IP address
- No gateway or wrong gateway to the SIP server
No flashing
Possible reasons:
- Station connected and registered to the SIP server
- Station not powered up (if no other LEDs are active)
5.2 Status LED
LED3 – Bicolor SMD LED on board component side.
Flashing 2 red + 1 green
- Station has no connection to the SIP server.
Flashing 1 red + 2 green
- Station connected but NOT registered in the SIP server.
Flashing 3 green
- Station connected and registered in the SIP server.
5.3 Power LED
LED6 – Yellow SMD LED on board component side.
Light:
13 V board power OK.
No light: 13 V board power faulty if no other LEDs are lit.
Possible reasons:
- 24 VDC or PoE not connected
- Faulty board
