15
SIP Master Stations Configuration
A100K11211
Sound Test Success
- If enabled, the station will send an SNMP trap when a sound test is
successful.
Input Button Pressed
- If enabled, the station will send an SNMP trap when an input button
is pressed.
Input Button Released
- If enabled, the station will send an SNMP trap when an input button
is released.
Relay Activated
- If enabled, the station will send an SNMP trap when a relay is
activated.
Relay Deactivated
- If enabled, the station will send an SNMP trap when a relay is
deactivated.
2.8
Automatic Configuration using TFTP
A SIP station may be set up to automatically poll configuration settings
for SIP, Call and SNMP from a TFTP server. The IP address of this
TFTP server can be obtained using DHCP procedures or be manually
configured.
Before you start the automatic configuration procedure:
● A configuration file should first be created. The relevant parameters
for SIP, Call and SNMP in the configuration file are described in
Section 7: Configuration File Parameters
.
● Follow the procedures described in
Section
3.1: TFTP Server
Program
.
To carry out automatic configuration from the station web server:
1. Start the TFTP server program and set the server path by browsing
to the directory where the configuration file is located.
2. Log on to the SIP Station web server.
3. Select
Advanced Configuration
>
Updates
