11
SIP Master Stations Configuration
A100K11211
2.5 Audio Settings
Click
Station Configuration
>
Audio Settings
Speaker Volume
- Select the volume level in the range 0 to 7 from the dropdown
menu. The default setting is 5.
Noise Reduction Level
- Level 0 means that the function is disabled
- Level 1 gives a maximum noise reduction of 0.2 dB
- Level 2 gives a maximum noise reduction of 6.2 dB
- Level 3 gives a maximum noise reduction of 12.2 dB
- Level 4 gives a maximum noise reduction of 18.3 dB
- Level 5 gives a maximum noise reduction of 24.3 dB
- Level 6 gives a maximum noise reduction of 30.3 dB
- Level 7 gives a maximum noise reduction of 36.3 dB
Microphone Sensitivity
- Select the sensitivity level in the range 0 to 7 from the dropdown
menu. The default setting is 5.
Remote Controlled Volume Override Mode
- This acts as simplex mode. This feature is activated after the first
DTMF * or # is received from the remote station. Send DTMF * to
talk and # to listen. Check the checkbox to enable this function.
Message Controlled Volume Override Mode
Check the box to enable the following messages:
- SIP MESSAGE ”Audio_receive_only”: Turns the microphone off
and loudspeaker on
- SIP MESSAGE ”Audio_send_only”: Turns microphone on and
loudspeaker off
- SIP MESSAGE ”Audio_send_receive”: Turns both microphone and
loudspeaker on
Default Speaking Mode
- Select between Open Duplex or Push-To-Talk
After entering all the desired values, click
Save
to enable the audio
settings.
