55
x
3. ZENEC
device
recalculates the route optimised for the new vehicle type. The orange
line now shows the new recommended route.
3.4.8 Changing the road types used in route planning
To recalculate the active route with different road type preferences, do as follows. These
changes can also be made in Settings (page 70).
1. On the Map screen, tap
and then tap
.
2. Tap any of the listed road types to modify the route. If needed, scroll the list for all road
types. You have the following options (their order depends on the selected vehicle
type):
x
- You might need to avoid motorways when you are driving
a slow car or you are towing another vehicle.
x
- Charge roads are pay roads where you can purchase a
pass or vignette to use the road for a longer period of time. They can be
enabled or disabled separately from toll roads.
x
- ZENEC
device
includes toll roads (pay roads where
there is a per-use charge) in the routes by default. If you disable toll roads,
ZENEC
device
plans the best toll-free route.
x
- ZENEC
device
includes ferries in a planned route by
default. However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on ferries.
x
- ZENEC
device
excludes unpaved roads by default:
unpaved roads can be in a bad condition and usually you cannot reach the
speed limit on them.
3. Tap
to confirm the changes. ZENEC
device
recalculates the
route. The orange line now shows the new recommended route.
