134
DEUTSCH
GERMAN
135
Problem
ursache
lösung
Disc-wiedergabe
Disc kann nicht eingelegt
werden.
Es befindet sich schon eine Disc im gerät.
Aktuelle Disc auswerfen und eine neue Disc
einsetzen.
Disc spielt nicht ab.
Disc ist verkratzt.
nur Discs in gutem Zustand benutzen.
Disc ist schmutzig oder nass.
Disc mit weichem Tuch säubern.
inkompatible Disc wurde benutzt.
kompatible Disc benutzen.
Disc ist verkehrt herum eingelegt.
Disc mit beschrifteter Seite nach oben
einlegen.
Region Code der Discs ist nicht mit dem
gerät kompatibel.
Disc mit korrektem Regionalcode benutzen.
PbC kann nicht während des VCD-
wiedergabe verwendet werden.
PbC ist nicht auf der Disc vorhanden.
Disc mit vorhandenem PbC benutzen.
wiederholung oder Suchfunktion
ist während des VCD-wiedergabe
unzulässig.
PbC ist eingeschaltet.
PbC ausschalten.
Fehlermeldungen
keine Disc.
Disc ist schmutzig.
Disc mit weichem Tuch säubern.
Disc ist verkehrt herum eingelegt.
Disc mit beschrifteter Seite nach oben
einlegen.
keine Disc eingelegt.
Disc einlegen.
Falsche Disc.
Disc ist schmutzig.
Disc mit weichem Tuch säubern.
Disc ist verkehrt herum eingelegt.
Disc mit beschrifteter Seite nach oben
einlegen.
unbekannte Disc.
Disc-Format ist nicht mit diesem gerät
kompatibel.
Disc mit kompatiblem Format benutzen.
Region-Fehler.
Regionalcode der Discs ist nicht mit dem
gerät kompatibel.
Disc mit korrektem Regionalcode benutzen.
FEHLERSUCHE
ANSCHLüSSE
anmerKungen Zum anschluss
■
Dieses gerät ist nur in Fahrzeugen, die mit einem bordnetz mit +12V (DC) und minus
gegen masse geschaltet sind, zu benutzen. bevor Sie dieses gerät in einem Pkw oder
in einem lkw installieren, stellen Sie sicher, dass die batteriespannung korrekt ist,
sonst müssen Sie einen Spannungswandler durch einen Fachmann installieren lassen,
um die Ausgangsspannung in +12V zu konvertieren.
■
um einen kurzschluss in der elektrischen Anlage zu vermeiden, kontrollieren Sie, ob
das negative batteriekabel vor der installation getrennt ist.
■
um einen kurzschluss in der Verkabelung und Schaden an diesem gerät zu vermeiden,
befestigen und sichern Sie alle kabel mit einem kabel- oder isolierband. Verlegen Sie
die kabel nicht in die nähe der heizung oder beweglicher Teile, wie z.b. gangschaltung,
handbremse und Sitzschienen, um das beschädigen der kabel zu vermeiden.
■
Führen Sie das gelbe Stromkabel nie durch das installationsloch in den motorraum, um
es direkt an die Autobatterie anzuschließen. Andernfalls kann es zu einem kurzschluss
in der elektrischen Anlage kommen.
■
Ersetzen Sie eine defekte Sicherung durch eine neue 10-A-Sicherung. wenn Sie keine
Sicherung oder Sicherungen mit falschem wert einsetzen, kann dieses gerät be-
schädigt werden oder sogar einen brandschaden verursachen. wenn eine korrekte
Sicherung installiert ist und das elektrische Problem wieder auftritt, dann setzen Sie
sich bitte mit einem Fachmann in Verbindung.
■
Schließen Sie kein anderes gerät an die Autobatterie an, um eine batterieüberhitzung
zu vermeiden.
■
Stellen Sie bitte sicher, dass alle Verkabelungsanschlüsse und lautsprecherkabel
gut isoliert sind. Andernfalls kann dieses gerät durch einen kurzschluss geschädigt
werden.
■
wenn keine 15 vorhanden ist, dann schließen Sie das gerät bitte mit einem
Schalter an die 30 an.
■
wenn ein Verstärker angeschlossen ist, schließen Sie das P.COnT-kabel bitte nicht
an das Stromkabel des Verstärkers an, andernfalls können elektrische Funken oder
andere Schäden entstehen.
■
Schließen Sie lautsprecheranschlüsse an die masse an, um Schäden an der
eingebauten Endstufe zu verhindern.
■
Die minimale leistung der lautsprecher, die an diesem gerät angeschlossen werden
können, ist 45 w, mit einem widerstand zwischen 4 und 8 Ω.