72
GW13-018_v01
18.9. Plug the espresso machine by putting the cord into the socket.
The machine will turn on. The display panel and the power on/off
button
(A)
will flash. The display panel will indicate power is
on
.
18.10. Push the power on/off button
(A)
, You will hear a sound signal.
18.11. The
indicator on the display panel will begin to whirl, signalizing
that the espresso machine is heating up.
18.12. When the
indicator stops whirling, you will hear a sound signal
informing you that the machine is ready for use (has reached the
right temperature).
18.13. Press and hold both the coffee amount select button
(C)
and the
steam/hot water select button
(E)
for 2 seconds. The remove
limescale indicator will stop flashing
, while the indicator
will
start whirling informing that the process of removing limescale has
begun.
18.14. Hot water with removed limescale will pour out of the brew
head
(5)
.
18.15. Wait before all the liquid comes out of the brew head
(5)
. Then
remove and rinse the tank
(1)
with clean water.
18.16. Place an empty container under the brew head
(5)
, so to let the hot
water flow into it.
18.17. To continue with the clearing process, fill the tank
(1)
with clean
water up to the maximum (MAX) level indicated on the water tank
(1)
. Close the cover of the water tank
(1)
and install it back in the
espresso machine.
18.18. Hot water will pour out of the brew head
(5)
(the espresso machine
rinses itself).
18.19. After the process of removing limescale hot water will stop pouring
our of the brew head
(5)
and the espresso machine will automatically
turn off.
18.20. Power on/off button
(A)
will light up and the power indicator
will flash on the display panel.
18.21. Unplug the espresso machine from the power supply.
18.22. Make sure that the espresso machine has cooled off.
18.23. Remove the water tank
(1)
and the drip tray
(9)
together with its grid
(8)
from the espresso machine
(Fig. 11)
.
18.24. Place the espresso machine upside-down and screw down the grid
to the filter head
(5)
by means of a fitting screwdriver
(Fig. 14)
.
18.25. Close the cover of the water tank
(1)
, and then install the tank
(1)
and the drip tray
(9)
with its grid
(8)
back into the espresso machine
(Fig. 13)
.
CAUTION! During the process of removing limescale all functions of
the espresso machine are disabled.
Fig. 11
Fig. 12
Fig. 13
Fig. 14
19. Cleaning and care
Always keep the espresso machine clean in order to provide high quality
of brewed coffee and extend the life-span of the machine.
1. Before you start cleaning, turn the espresso machine off and unplug it
from the power supply.
2. Make sure that the espresso machine has cooled off.
3. Do not immerse the espresso machine in water or any other liquids.
4. Do not wash any part of the espresso machine in a dishwasher.
5. Wipe the casing of the machine with a wet cloth or sponge.
6. Remove the filter handle
(7)
from the coffee machine and then remove
coffee grounds. Clean the filter handle
(7)
and the filter with a wet cloth
or sponge.
7. Dry the cleaned part on air or with the use of a cloth – do not dry them
in an oven or a microwave.
8. Remove the drip tray grid
(8)
and the drip tray
(9)
from the espresso
machine and pour water out of them. Then clean them with a wet cloth
or sponge.
9. Remove the cappuccino attachment by unscrewing it and pulling it
downwards.
