Zelmer 986, Руководство пользователя, Страница: 74 / 75

77
ATTENTION! Do not look into the grinding chamber
during operation, as the beans which pop out
sometimes, can hurt you (i.e. your eye).
Cleaning and maintenance
The grinder does not requires the cleaning after each
operation (if it`s grinded one kind of product), cause the
worm prevents falling the seeds residues into grinder. Dry
the steel quern (4, 5) using a soft cloth after cleaning to
prevent corrosion. In case of long-term storage, conserve
the quern by greasing them (you can use edible oil). Do
not immerse the quern into boiling water. The part of plastic
(don`t containing the graphic) can be washed in the dish-
washer (max. of 60°C).
After operation (Fig. 11)
Switch off and unplug the appliance.
●
Remove the pusher and take out the tray from the mincer
●
body, the shredder body or the juicer body (in case of the
citrus juicer separately remove the squeezer and screen).
Press the lock button
●
(1) , turn (2) the mincing unit, the
shredder body (or the citrus juicer bowl) to the right and
remove it.
In case of the citrus juicer take out the clutch from the
●
motor.
Dismantle the elements of the mincing unit, the body with
●
the sausage filler nozzle, the juicer body or the shredder.
Store the clean and dry screens in the compartment. In
●
order to do so:
Open the compartment on the back of the housing.
●
Press the compartment lock on both sides and pull ●
(as shown earlier).
(3) ● Store up to two screens and close the compartment
and the back lid (4) .
(5)
●
Put away the cord, pushing it gently through the
opening.
(6)
●
Place the plug in the compartment.
Cleaning and maintenance
Wipe the motor with a damp cloth with dishwashing
●
liquid.
Wash plastic elements in warm soapy water or in the
●
dishwasher according to the denotations.
Wash metal elements in hot soapy water.
●
Dry all elements thoroughly.
●
Grease the screens and cutter with cooking oil to protect
●
from rusting.
Assemble dry elements of the mincer body or the
●
shredder.
The manufacturer does not accept any liability for any damages
resulting from unintended use or inappropriate handling. The
manufacturer reserves his rights for modifying the product any time
in order to adjust it to law regulations, norms, directives, or due to
construction, trade aesthetic or other reasons, without notifying it in
advance.
Ecology – Environment protection
Each user can protect the natural environment.
It is neither difficult nor expensive.
In order to do it: put the cardboard packing into
recycling paper container; put the polyethylene
(PE) bags into container for plastic.
When worn out, dispose the appliance to particular disposal
centre, because of the dangerous elements of this appliance,
which can be hazardous for natural environment.
Do not dispose into the domestic waste disposal!!!