Zelmer 28Z018, Инструкция по эксплуатации

Страница: 52 / 56

52
How to fill the water
Disconnect the iron from mains supply –
outlet.
Move the – Steam Control Knob (2) to
position.
Release the water inlet cover – (5) and fill
water through the water inlet hole.
Fill up to the „ – MAX ” level marked on the side of the water tank.
Close the water inlet cover – (5) .
For best result, it is advisable to use demineralised water or distilled
water.
Do not use chemically descaled water or any other liquids.
Preparation for operation– first time ironing
Remove any protective films or stickers from the – sole plate (10) and
the cabinet.
Unwind and straighten the – power cord (12) .
Fill the water tank with demineralised water or distilled water. (See –
How To Fill Water).
Connect the iron to a suitable mains supply outlet. –
Turn the – Temperature Dial (2) in clockwise direction to ●●● position
– control light (4) glows.
Control light goes off when the required temperature is reached. –
Move the – Steam Control Knob (2) to position.
Steam starts coming out from the holes in the sole plate after putting –
the iron in horizontal position and after Burst of steam knob (9) .
Begin first time ironing with an old towel. –
When the water tank is empty and there is no more steam produced; –
the preparation work is completed. The iron is now ready for proper
use.
After ironing
Move the – Temperature Dial (2) in anti-clockwise direction to „ MIN ”;
the iron is switched off.
Move the – Steam Control Knob (2) to position.
Disconnect the iron from mains supply outlet. –
When the iron gets cool completely, store it vertically in a safe place. –
Spraying
This func – tion can be used any time
and is not affect any setting.
Fill the water tank as described in –
How to Fill Water.
Aim the – nozzle (7) to the garment.
Press the – Spray Button (3) .
It may be necessary to press the spray button a few times to start
this function.
Dry ironing
– Always follow the garment manufacturer’s ironing
instructions mentioned at the garment label.
Unwind a – nd straighten the power cord.
Move the – Stea m Control Knob (7) to position.
Connect the iron to a suitable mains supply outlet. –
Turn the – Temperature Dial (2) in clockwise direction to; set ●, ●● or
●●● position.
Control light (4) – glows, indicating that the iron is on.
Control light goes off when the required temperature is reached. The –
iron is now ready for use.
Move the – Temperature Dial (2) in anti-clockwise direction to „ MIN ”;
the iron is switched off.
Disconnect the iron from mains supply outlet. –
When the iro – n gets cool completely, store it vertically in a safe place.
Steam ironing
– Always follow the garment manufacturer’s
ironing instructions mentioned at the garment label.
Fill th – e water tank with demineralised water or distilled water. (See
How To Fill Water)”.
Connect the iron to a suitable mains supply outlet. –
Move the – Steam Control Knob (2) to position.
Turn the – Temperature Dial (11) in clockwise direction to ●●● position.
(For optimum steam quality, do not use ● or ●● setting for steam iron - –
ing).
Control light (12) – glows, indicating that the iron is on.