ZEKLER 4050, Инструкция по эксплуатации

Страница: 7 / 80

• REPLACE THE FRONT COVER LENS.
Replace the front cover lens if it is damaged
(cracked,scratched,dirty or pitted) Place your finger or thumb into the recess at the bottom
edge of the wirdow and flex the window upwards until it releases from one edge (See fig.6).
• REPLACE THE INNER COVER LENS.
If it is damaged (cracked, scratched, dirty or pitted).
• CHANGING THE SHADE CARTRIDGE
(See figs.6a & 6b).
• INSTALLING NEW CARTRIDGE.
Take the new shade cartridge and pass the potentiom -
eter cable under the wire loop before dropping the cartridge into its retaining frame inside
the helmet. Press down the wire loop clip and ensure that the front edge of the loop is
properly retained under the retaining lugs as shown in fig.6b.
• Fasten the potentiometer to the inside of the helmet with the shaft protruding through the
hole. Push the shade control knob onto the shaft.
• CLEANING.
Clean helmet by wiping with a soft cloth. Clean the auto darkening filter
surfaces regularly. Do not use strong cleaning solutions.Clean sensors and solar cells with
methylated spirit and a clean cloth and wipe dry with a lint-free cloth.
fig.6
fig.6b
fig.6a
NOTE:
SMAW – Shielded Metal Arc Welding TIG, GTAW – Gas Tungsten Arc Welding
MIG (Heavy) – MIG on Heavy Metals MIG (Light) – MIG on Light Alloys
PAW – Plasma Arc Welding PAC – Plasma Arc Cutting
SAW – Shielded Semi-Automatic Arc Welding MAG/CO2 - Metal Active Gas
10
11
SMAW
MIG(heavy)
MIG(light)
TIG,GTAW
MAG/CO2
SAW
PAC
PAW
9 10 11 12 13 14
12 13 14
12 13 14 15 10 11
12
13 14
10
9
11
12 13 15 14 10 11
12 13 11
12 13 15 14 11 10 9 8
12 13 15 14 11 10
Welding Process
0.5 20 10 40 80 125 175 275 450 350
500 400 300 250 200 150 100 60 30 15 5 1
225 2.5
ARC CURRENT
（
Amperes
)
SHADE GUIDE TABLE
(NO.1)
- 5 -