Zeiss SL 800 Скачать руководство пользователя страница 86

Страница: 86 / 94

12 Optional accessories

Documentation set

SL 800

12.13 Breathing shield

86 / 94

000000-2268-355-DokS-GB-300719

12.13 Breathing shield

A breathing shield may be mounted to the carrier arm of the
stereomicroscope to shield the patient and physician from each
other's breath.

Assembly:

Action

1. Attach the breathing shield to the carrier arm of the stereo-

microscope using the integrated screw.

2. Remove the protective film, if necessary.

12.14 Paper pads

Paper pads for the chinrest of the headrest improve hygienic condi-
tions.

Attaching the paper pads:

Action

Place the paper pads onto the chinrest using the fastening pins
supplied with the headrest.

12.15 Instrument table

WARNING!

Electrical hazard due to improper electrical connection

Improper electrical installation may cause an electric shock.

Connect the device via an instrument table qualified by
Carl Zeiss Meditec. If using another table, the user is solely
responsible for ensuring the electrical safety of the device.

Содержание SL 800






























































































Результаты поиска

Содержание SL 800

Отзывы:

Zeiss SL 800, Набор документации на продукцию, Страница: 86 / 94

Результаты поиска

Содержание SL 800

Отзывы: