Zeiss SL 800, Набор документации на продукцию, Страница: 38 / 94

7 Operation Documentation set
SL 800 7.3 Positioning the diffusor
38 / 94 000000-2268-355-DokS-GB-300719
Adjust the eyepieces to your individual correct refraction values or
to a possible instrument myopia using the optional focusing rod.
Mount the optional focusing rod and adjust the eyepieces as
follows:
6. Remove the cover of the swivel joint and store it for further use
in a safe place.
7. Insert the focusing rod into the swivel joint and rotate the black
observation plane of the focusing rod to the front of the
stereomicroscope.
8. Swivel the observation unit and illumination unit to the center
position (0°).
9. Set the slit width to about 1 mm.
10. Select a medium magnification (i.e. 10x or 16x).
Perform the following steps for each eye individually:
11. Set the diopter scale to +8 D.
12. Rotate the diopter scale of the eyepiece towards -8 D until you
see a focused slit projection.
13. Set the interpupillary distance on the binocular tube to your
interpupillary distance.
7.3 Positioning the diffusor
If necessary, swivel out the diffusor. Swivel the diffusor in only if
you need diffuse illumination for examination of the anterior eye
segment. The diffusor can be attached to either the left or right
arm of the projector, depending on user preference.
1
2
Figure 14: Possible positions of the diffusor on the mirror
1 Diffusor swiveled in 2 Diffusor swiveled out