Zeiss SL 800, Набор документации на продукцию, Страница: 27 / 94

Documentation set 4 Installation
SL 800 4.1 Installation safety
000000-2268-355-DokS-GB-300719 27 / 94
4 Installation
4.1 Installation safety
WARNING!
Electrical hazard
The use of unsuitable power cables could result in electric shock.
u
Ensure that the power supply plug is suitable and certified for
the local connection.
u
Observe the following specifications when replacing the
supplied power cable:
- Protective earth conductor resistance maximum 0.1 Ohm
- Local certification of the power cable for connection to
medical devices
- Device plug C13 conforming to IEC 60320
- Cross-section at least 0.75 mm
2
/ AWG 18 ; Hospital Grade
design for specific countries (e.g. USA, Canada) (For cables >
2.5 m the cross-section must be increased to 1.5 mm²).
WARNING!
Electrical hazard due to connecting additional devices
If other system components are connected to the instrument table
than those described in this manual, a non-medically-rated system
is created in accordance with IEC 60601-1. There is a risk of
electrical shock.
u
No components other than the system components described
should be connected.
u
In case of system changes ensure that the safety requirements
as per IEC 60601-1 are met.
u
Always ensure that all external accessories are approved as a
medical device or connected to a power isolation transformer.
u
The power supply connections of the instrument table must
only be used for supplying power to the device. Use of the
power supply connections as a multiple socket is prohibited.
u
Only use the USB ports on the power supply unit to power the
optional accessories described or to write log files or import
software updates (see Installing software updates for the
device [
}
50] and Creating a log file [
}
50]). Any other use is
prohibited.
WARNING!
Fire hazard from faulty electrical installation
Fire can occur due to faults in the electrical installation.
u
Ensure that the electrical installation conforms to IEC
60364‑7‑710.
u
Ensure that the power consumption data on the type plate are
met when selecting overcurrent protection.