Zeiss SL 800, Набор документации на продукцию, Страница: 46 / 94

8 Cleaning and disinfection Documentation set
SL 800 8.2 Cleaning
46 / 94 000000-2268-355-DokS-GB-300719
8.2 Cleaning
The optical components (mirror, front lens and eyepieces) can be
cleaned if necessary. To remove dust from surfaces accessible from
the exterior, use a soft brush.
Action
u
Use the following utensils for cleaning:
• LensPen
®
cleaning pen (order number 000000-0483-896)
• ZEISS optical cleaning set (order number 000000-1216-071)
u
Clean the front lens by moving the swab or lens-cleaning
instrument with a circular motion from the center of the lens to
the edge. Then switch on the illumination of the device to
check the cleaning effect.
u
Clean very dirty paint surfaces with a cloth moistened (not
dripping) with weak detergent.
u
We recommend using paper pads for the chinrest. Replace the
paper pads after each patient.
u
Use the supplied cover to protect the device from dust when
not in use.
8.3 Disinfection
Device parts with which the patient has come into contact, e.g.
chinrest and forehead support, should be cleaned before each
examination with a disinfectant approved for the purpose. These
parts are not removable.
We recommend wipe disinfection, as optical components can be
damaged by spraying with disinfectants. Please note that only the
forehead support and chinrest are to be disinfected, but no optical
components of the device.
Action 1. In case of coarse contamination (e.g. makeup or dirt stains)
remove visible stains with a soft cloth, moistened with a mild
detergent or 70% isopropyl alcohol solution.
2. Then use another soft cloth, moistened with 70% isopropyl
alcohol solution, and wipe the surfaces of the forehead support
and chinrest so that they are completely wetted.
3. Do not rub the surfaces dry, but allow the surfaces to dry
completely, before the patient comes in contact with them.