Zeiss SL 800 Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 94

Zeiss SL 800 Скачать руководство пользователя страница 61

Documentation set

11 Technical specifications

SL 800

11.10 Electromagnetic compatibility

000000-2268-355-DokS-GB-300719

61 / 94

Relevant accessories, cables and transducers:

• Power supply cable (2.5 m)

• Cable extension set (5.0 m)

• Wide-field illumination with connection cable (0.9 m)

• USB cable for accessories of photographic documentation

• SL cam compact

• SL Workstation

• Instrument table

No regular inspections and maintenance are required in order to
maintain electromagnetic compatibility (EMC). If obvious damage
to the device is detected (e.g. housing or cables), remove the
device immediately from service, label it clearly as being out of
service, and contact ZEISS Service. It may still be possible to operate
SL 800, but there could be increased emissions and/or decreased
immunity.

The following guideline applies only to the accessories specified for
and delivered with the device from ZEISS.

Emission

Emitted interference

Standard

Compliance

Conducted emission

CISPR 11

Group 1, Class B

Radiated emission

CISPR 11

Group 1, Class A

Harmonic emissions

IEC 61000-3-2

Class A

Voltage fluctuations/flicker emissions

IEC 61000-3-3

Complies

«
...
59
60
61
62
63
...
»

Содержание SL 800































































































Отзывы:

Нет отзывов