Service Instructions
Confidential and Proprietary
SM-30-0030-A02
Order No. -
14 / 27
Version 07, 2015-12-03
2)
Lubricate the balancing screw with GF 100
grease and screw it in.
3)
Re-attach support plate (
1
). To do this, apply
KL 44 threadlocker to the thread of screws (
2
),
screw them in and tighten them only to such an
extent that the balancing screw can still be
turned and no snapping noise can be heard
when the suspension arm is moved up or down.
4)
Re-attach the cover plate below the balancing
screw.
Fig. 18: Re-attach the cover plate
5)
Slightly press the halves of the arm together
and secure the cable leading from the
illumination potentiometer in the clip on the
upper half of the arm, if necessary.
6)
Insert pin (
3
) in lock (
4
).
Fig. 19: Insert pin in lock
7)
Insert pin (
5
) and secure it in position with
setscrew (
6
).
8)
Re-attach protection flap (
7
).
9)
Mount the top cover and the locking screw of
the suspension arm.
10)
Re-insert OPMI®.
11)
Balance the suspension arm.
Fig. 20: Re-attach protection flap, locking screw
OPMI and balance the suspension arm
1
2
4
3
7
6
5
