manualshive.com logo in svg

Zeiss LSM 510 Inverted, Руководство по эксплуатации

Поделиться
Скачать
Zeiss LSM 510 Inverted Скачать руководство пользователя страница 102

OPERATION

Image Acquisition (Acquire)

LSM 510

4-44

B 40-51 e   07/98

<Add Track> button

An additional track is added to the configuration list. The
maximum of four tracks can be added.

<Delete> button

The track previously marked in the 

List of Tracks

 panel

 

in the

Name 

column is deleted.

<Enabled> button

The track previously marked in the 

List of Tracks

 panel

 

in the

Name 

column is activated or deactivated. A tick 

 in the button

and also in the 

List of Tracks

 indicates that the relevant track is

activated.

When adding new tracks, the following sequence should be followed:

(1) 

Add a track by clicking on the <Add Track> button.

(2) 

Determine the configuration of the track in the 

Beam Path and Channel Assignment

 panel 

or

select an existing one from 

Track Configurations

 and activate it via the <Apply> button.

(3) 

Store the name of a configuration defined via the <Track Configurations> button via <Store> and
use <Apply> for activation. The new track will then be displayed in the 

List of Tracks

.

(4) 

Add the next track via the <Add Track> button and then configure and store it again.

The following different functions are available for storage:

<Recording Configurations> button

Stores the complete configuration data and not just the
track configuration.

<Track Configurations> button

Only the configuration of the selected track is stored.

☞

When the 

Recording Configurations 

function is used, additional tracks cannot be

configured. Only the entire configuration can be changed.

Содержание LSM 510 Inverted











































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды