Installation of the AxioCam MRc5
AxioCam MRc5 Instal Reference
17
Connecting the AxioCam MRc5 to the onboard FireWire interface of the
notebook
The camera is powered by the FireWire hub. The hub must therefore be
connected to the power supply. If you switch off the FireWire hub, the
camera is also switched off.
When the power supply of the FireWire hub is connected, the red LED of
the FireWire hub lights up. The green LED of the FireWire hub lights up as
soon as a FireWire device is connected.
The AxioCam MRc5 has been designed for continuous operation. During
operation the camera may heat up. This is quite safe, and does not in any
way impair the functioning of the device.