Installation of the AxioCam MRc5
AxioCam MRc5 Instal Reference
13
The AxioCam MRc5 has been designed for continuous operation. During
operation the camera may heat up. This is quite safe, and does not in any
way impair the functioning of the device.
Operating the AxioCam MRc5 on a notebook
Depending on your notebook’s specifications, you can choose between two
forms of connection:
connection of the camera to the FireWire PCcard (CardBus) interface card
connection of the camera to the notebook’s integrated (onboard)
FireWire interface
In both cases the FireWire hub is also required to supply power to the
AxioCam MRc5. The AxioCam MRc5 is connected using the cables supplied
with the camera and the hub.
Operating the AxioCam MRc5 on a notebook
using the FireWire PCcard (CardBus) interface
card
Installing the PCcard (CardBus) interface card on the
notebook
Static electricity can damage electronic components. To protect
electronic components against static electricity, do not touch them
until you have earthed yourself to the casing of the device. Never
touch the contacts of electronic components.
