manualshive.com logo in svg

Zeiss Axio Vert.A1, Руководство по эксплуатации

Поделиться
Скачать
Zeiss Axio Vert.A1 Скачать руководство пользователя страница 23

 

INSTRUMENT DESCRIPTION 

Axio Vert.A1

 

Technical Specifications 

Carl Zeiss 

 

 
 

05/2012 

431030-7044-001 

23 

2.4

 

Technical Specifications 

Dimensions 

Dimensions (Width x Depth x Height) 

Axio Vert.A1 ....................................................................................... 235 mm

*

 x 560 mm x 560 mm 

Axio Vert.A1 FL or A1 FL-LED ........................................................... 235 mm

*

 x 560 mm

***

 x 560 mm 

Axio Vert.A1 MAT ......................................................................... 220 mm

**

 x 560 mm

***

 x 355 mm 

 

* 

Equipped with fixed stage without object guide  

 

**  Without mechanical stage; with 40 mm x 40 mm mechanical stage: Width: 295 mm 

 

***  Depth: 560 mm, without external (reflected light) illuminators   

The above measurements are maximum dimensions, which include space for cable and connector outlets. The 
depth was measured at an interpupillary distance of 62 mm, with binocular parts lowered.  
 
Transmitted light LED illumination results in the height of transmitted light stands being reduced by 29 mm. 

 

Weight**** 

Axio Vert.A1 Stand  ................................................................................................................ 10.5 kg 
Axio Vert.A1 FL-LED Stand ...................................................................................................... 12.3 kg 
Axio Vert.A1 FL Stand  ............................................................................................................ 11.7 kg 
Axio Vert.A1 MAT Stand  ........................................................................................................ 10.3 kg 

 

****  Actual weight of the stand without any attachments, such as stages, tubes, etc. 

 

Ambient Conditions 
Shipping (in Packaging): 

Permissible ambient temperature ............................................................................... -40 °C to +70 °C 

Storage: 

Permissible ambient temperature ................................................................................ +5 °C to +40 °C 
Maximum permissible humidity (without condensation) ................................................. 75 % at 35 °C 

Operation: 

Permissible ambient temperature ................................................................................ +5 °C to +35 °C 
Maximum permissible humidity (without condensation) ............................................... 75 % at +35 °C 
Maximum altitude for use ...................................................................................................... 2,000 m 
Atmospheric pressure ......................................................................................... 800 hPa to 1,060 hPa 
Pollution degree ............................................................................................................................... 2 

 

Operating Specifications 

Operating environment ................................................................................................... Enclosed spaces 
Safety class .............................................................................................................................................I 
Degree of protection ....................................................................................................................... IP 20 
Electrical safety ..................................................................As specified in DIN EN 61010-1 (IEC 61010-1), 

taking into account CSA and UL regulations 

Overvoltage category ............................................................................................................................. II 
Radio interference suppression .......................................................... As specified in EN 55011 for Class B 
Noise immunity ....................................................................................... As specified in DIN EN 61326-1 
AC line voltage range ................................................................................. 100 VAC to 240 VAC ±10 %  
Line frequency .................................................................................................................. 50 Hz to 60 Hz 
Maximum power consumption of internal power supply unit  ......................................................... 80 VA 

 

Содержание Axio Vert.A1











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды