EN - 16
Step
Action
9
Mount the plastic front cover
A
onto the
unit. Check that the top of the plastic
design front is properly matching the
recesses and that it goes smoothly above
the CAQ front plastic cover. Then fix the
ComfoClime plastic front
A
with the two
provided screw on top and the two on the
bottom; mount the black top front cover
B
pushing gently the four pins into the
housing.
B
A
10
Connect the preferred drain ending, placed on the lateral side to the water drain system
and plug the other up with the provided cap.
NOTE: do not install a dry siphon: the overpressure in the unit could open the
dry siphon guard and cause an air leakage.
Install only external wet siphon with a 100mm guard according to the local
regulations. The siphon can have an open funnel.
