Zehnder Rittling ComfoClime 24, Руководство по установке

Страница: 14 / 24

EN - 14
Step Action
5
Unpack carefully the ComfoClime and place carefully the ComfoClime over the ComfoAir
Q respecting all the safety rules taking as reference the four pins on its bottom which
have to fit in with the corresponding recesses in the EPP standoffs;
WARNING!
Never lift the unit alone. It is heavy and must be mounted with accuracy
and carefully, being sure the gaskets do not dislodge while installing.
NOTE: during the placement of the ComfoClime on top of the ComfoAir Q,
remember to arrange the power supply cord so that it will exit from the back
of the unit.
6
Connect the free end of the provided ComfoNet cable to the ComfoAir Q connector
paying attention to make the cable going to the back of the unit and then coming back to
the front staying below the grey skid/lid of the ComfoAir Q as shown:
a. CAN_L: white
b. CAN_H: yellow
c. GND: black
C
D
To get access to the front ComfoAir Q connector, open the black panel of the ComfoAir Q
rotating it downwards and pull out the grey lid D;