13 - EN
Before proceeding with the ComfoClime installation, write the serial number of
the ComfoAir Q, located below the grey upper lid, in the designated space of the
ComfoClime installer manual. This serial would be useful in case of future remote
access to the unit . Write down also the serial number of the ComfoClime for an easy
future necessity of it.
The ComfoClime must be placed on top of the ComfoAir Q according to the following steps:
Step
Action
1
Make sure that the ComfoAir Q is properly placed in its final position (see the ComfoAir Q
installation manual);
2
Put the two EPP standoffs on the top part
of ComfoAir Q as shown in the picture with
the metallic plates on the front;
3
Place the four rubber gaskets over the
spigot openings verifying the full insertion
of them. Check that the sealings are
creating an effective seal between the
spigot and the adapter plates;
4
Once carefully unpacked, remove the two
parts of the front pulling out the upper black
top A and unscrewing the four screws (two
on the top and two on the bottom) of the
white cover B;
A
B
