Zehnder Rittling ComfoAir 350, Руководство по установке

Страница: 14 / 36

EN - 14
2.7.2 P menus for the user
Menu P1
¨
Status of programmes
Status
Sub-menu Description Activated
P11 Is menu 21 currently active? Yes (1) / No (0)
P12 Is menu 22 currently active? Yes (1) / No (0)
P13 Is menu 23 currently active? Yes (1) / No (0)
P14 Is menu 24 currently active? Yes (1) / No (0)
P15 Is menu 25 currently active? Yes (1) / No (0)
P16 Is menu 26 currently active? Yes (1) / No (0)
Menu P2 ¨ Setting time delays
Time delay values
Sub-menu Description Minimum Maximum General
Reset
P21
(Optional)
Note:
Only applies to systems fitted with a
corded switch and a second switch in
the bathroom.
Delay timer for the bathroom switch (to switch to high
position).
■
'x' minutes after operating the bathroom switch, the
ComfoAir switches to the high setting.
- Low voltage input
0 Min. 15 Min. 0 Min.
P22
(Optional)
Note:
Only applies to systems fitted with a
corded switch and a second switch in
the bathroom.
Overrun timer for the bathroom switch (to switch to
normal position).
■
'x' minutes after operating the bathroom switch, the
ComfoAir switches back to the normal setting.
- Low voltage input
0 Min. 120 Min. 30 Min.
P23
(Optional)
Note:
Only applies to systems fitted with a
hardwired 3-position switch.
Overrun timer for ventilation position 3 (using a wired
3-position switch).
■
If ventilation setting 3 (high) is switched on briefly (<
3 sec), the ComfoAir will switch to the high setting
for 'x' minutes and then automatically returns to the
normal setting.
If any 3-position switch is operated during this lagging
time the ComfoAir will instantly revert to the ventilation
position as set at that time.
0 Min. 120 Min. 0 Min.
P24 Filter warning
■
'x' weeks after cleaning the filters the "filter dirty"
alert will reappear.
10 weeks 26 weeks 16 weeks
P25
Note:
Only applies to systems fitted with an
RF switch.
Overrun timer for ventilation setting 3 (using " ").
■
After pressing " " briefly (< 2 sec.), the ComfoAir
will switch to the high setting for ‘x’ minutes and then
automatically returns to the normal setting.
If any 3-position switch is operated during this lagging
time the ComfoAir will instantly revert to the ventilation
position as set at that time.
1 Min. 20 Min. 10 Min.
P26
Note:
Only applies to systems fitted with an
RF switch.
Overrun timer for ventilation setting 3 " using ".
■
After pressing " " continuously (> 2 sec.), the
ComfoAir will switch to the high setting for ‘x’ minutes
and then automatically returns to the normal setting.
If any 3-position switch is operated during this lagging
time the ComfoAir will instantly revert to the ventilation
position as set at that time.
1 Min. 120 Min. 30 Min.
P27 N/A 0 Min. 120 Min. 30 Min.
Menu P9 ¨ Status of programmes (from menu P5 and P6 additional programmes)
Status
Sub-menu Description Activated
P90 Open fire programme active? Yes (1) / No (0)
P91 Bypass Open? Yes (1) / No (0)
P94 Analogue input (0-10V) active? Yes (1) / No (0)
P95 Frost protection or Preheater active? Yes (1) / No (0)
P97 Enthalpy programme active? Yes (1) / No (0)