ZyPer4K-M
User Manual Revision 2.5
Setting up ZyPer4K in Many to Many Environment
A many to many, or switched environment involves connecting many sources to many displays.
ZyPer4K allows you a flexible and scalable amount of input-output options without limitations.
For example, in a 24-port configuration, you can configure a 1x23, 6x18, or 4x20 (and so on)
system. A network switch is needed in these many to many configurations. These environments
also require configuration through the ZyPer4K management software.
To set up ZyPer4K in a many to many environment, you have to:
• Install ZyPer4K management software
• Connect all Encoders and Decoders to the 10Gb network switch
• Switch (or route) video from sources to displays
Please consult the
ZyPer Management Platform User Manual
for additional details on
switching/routing video from sources to displays.
Please consult the
ZyPer4K Network Requirements and Security Considerations
document for details on Network switch requirements.
Both documents are available on the ZeeVee website:
https://www.zeevee.com/documentation-all-products
User Manual
Page
of
17
53
Fiber or Copper
10 Gigabit
Ethernet Switch
