ZDL-GSM-516-5112 Mobile Network Voice Intercom
With Access Control
7 |
P a g e
******Important Wiring Tips
It is highly recommended that you make use of included power supply. We do not recommend any third
party power supply, and if you choose to do so. Please consult system vendor to be sure that intended
third-party hardware will cause no harm/damage to system.
System Board Wiring/Connection:
****Important (Network Configuration)
Make sure to follow wiring instruction as specified above. With loaded SIM-Card on board, nothing else
should be required to link system to public network. System should search, locate and establish
connection to the closest cell tower on its own.
Link Signal Meter/Indicator is located on the upper left corner of the screen. It will display signal link
strength between tower and system. Included antenna strength goes as far as almost 2.5-miles, and it is
totally waterproof/weatherproof with magnetic base stand.
***Important***
+Linking Public Network
Initial Identification by your service
provider’s server actually depends on the
proximity of the closest cell-tower to
system location.
Connecting this device to your service
carrier’s network requires strong network
signal to obtain successful handshake
between carrier’s network and this
device.
If you are experiencing weak link signal,
you can:
1.
Take device to a different
location and power on & off.
2.
Relocate Antenna to higher level.
Note:
You Must Tell Your Service Provider To
Disable Voice Message Function. This
Function Is Not Required.
Memory Card Here
Sim Card Here
E-Lock Wires Here
Sy
stem
Po
w
e
r
Antenna Here
