ZDL-GSM-516-5112 Mobile Network Voice Intercom
With Access Control
10 |
P a g e
System Main Menu:
Now that all required accessories like: SIM-Card, SD-Card, Antenna, Power Supply and E-lock (If needed)
have installed, the next step will be to power system on. System will conduct self-check each time it
powers on/off. A
“Welcome”
screen displays, then system “Status” screen follows: Status Screen should
display “Welcome” on top with operating instructions at the bottom as shown below. **Note: Screen
dims down (Standby Mode) after approximately 10-seconds.
**Main Screen Display Instructions
*Dial:
Means, visitors/guests can enter 3-4-digit apartment number at anytime and pressing
#
to dial.
*Unlock:
This feature is intended for tenants with authorized assigned CODE to gain access to the building by
simply pressing
*
to access code input screen. Upon display, input 6-digit assigned CODE and press # to
unlock Electronic Lock. ***Note: Default Administrative Unlock Code Is: 123456
*Menu:
By pressing
#
, you will be navigating to 3-major areas of which two is mainly visitors/guest features.
****Important Tips!!!
Make Your Selection Using
Menu Number
:
Instruction (1), Query (2)
etc.
