ZDL-GSM-516-5112 Mobile Network Voice Intercom
With Access Control
12 |
P a g e
System Main Programming Menu Cont’d
**Password Set: (Option-1)
(
Note: Editing Password Set: Press-1, System Set: Press-2, User Set: Press-3, Capacity Set: Press-4 etc
)
Press 1 to enter this menu. This is where you can edit Administrative
Password, Administrative E-Lock
Code, and Enable/Disable Administrative E-Lock
function.
**Administrative Password Tips
Default System Admin Code Is:
123456
Default Admin unlock Code Is:
123456
[Admin Unlock Process: Press [*], Enter Room Number [Default: 0000], Press [#]. Then [#]
*To change admin password/code: Press 1, enter new 6-digit password (Numbers Only). Re-enter to
confirm password. System will authenticate changes by indicating “
DONE
”. Same process apply to
admin unlock code.
*Disabling Unlock Function: Automatically disables admin unlock password to function.
**System Set: (Option-2)
This section consists of questionnaire about how you choose to have system function during operation.
You can edit system
Talk Time (Communication Length), Microphone Volume, Speaker Volume,
Preferred Event Archive Mode, Maximum User Capacity Setting, Date/Time/Year
settings.
To edit
Talk Time
,
Press 1
. System accepts time range between 1 To 3-Minutes, enter using keypad.
To edit
Microphone Volume
,
Press 2
. System accepts volume range from 0 To 6. Key-in your choice.
To edit
Speaker Volume
,
Press 3
. Volume range is 0 To 7, enter your option
To edit
Preferred Mode
,
Press 4
, Option to Capture Visitor’s Photo or Video
(
Note: Photo Capture / Video Recording Not Available In This Model
).
Editing
Capacity
,
Press 5
and enter System desired capacity (User Capacity Can Not Exceed Specification)
Editing
Date/Time/Year
,
Press 6
to change current settings. Enter hour (
Military Time format
recommended
), enter minutes and Press
#
to skip to Year/Month/Date. Press
#
again to confirm.
****Navigating Setup Menu
: Enter Menu Item Number To Select Menu, Press # To Exit
