Zcom AS220V2, Руководство пользователя

Страница: 16 / 71

AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual
Page 16
4.3.1.6.4. Connections
This page is used to display a graphical overview of active network connections in real time. The
following parameters are available in UDP/TCP/Other section:
Parameter Description
UDP/TCP/Other
Displays the number of UDP (User Datagram Protocol)/TCP (Transmission
Control Protocol) and other (other than TCP/UDP) network connections in real
time.
•
Average - Displays the average number of UDP network connections.
•
Peak - Displays the peak number of UDP network connections.
The following parameters are available in this section:
Parameter Description
Network/Protocol Display the network/Protocol used by the active network connection.
Source/Destination Displays the source/destination IP address and TCP/UDP port number of the
active network connection.
Transfer
Displays the transfer data rate (bytes and packets) of the active network
connection.
System 4.3.2.
4.3.2.1. System
This page is used to display and configure basic system settings like the logging and the date/time
settings.
4.3.2.2. Administration
4.3.2.2.1. Router Password
This page is used to change the password for accessing on the AP.
4.3.2.2.2. SSH Access
The following parameters are available in this section:
Parameter Description
Port
Enter the TCP/UDP port number for the SSH connection. The default
port number is 22.