Zcom AS220V2, Руководство пользователя

Страница: 42 / 71

AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual
Page 42
The following parameters are available in this section:
Parameter Description
Bring up on boot
Select this option to bring up this interface when the device
rebooted.
Enable IPv6 negotiation on
the PPP link
Select this option to enable IPv6 negotiation on the PPP link.
Use default gateway
Select this option to use the DHCP assigned default gateway on
this interface.
Use gateway metric Enter the metric for the gateway here.
Use DNS servers advertised
by peer
Select this option to use the DHCP assigned DNS server addresses
on this interface.
Use custom DNS servers
Enter the IP address or domain name for a custom DNS server
here.
More than one entry can be created.
Override MTU
Enter the MTU value here to override the default MTU value used
on this interface.
LCP echo failure threshold
The peer will be presumed to be dead after the given amount of
LCP echo failures are reached. Enter 0 to ignore failures.
LCP echo interval
LCP echo request are sent at this specified interval. This function is
only effective in conjunction with the failure threshold function.
L2TPv3 encapsulation mode Select the L2TP (Version 3) encapsulation mode here. Options to
choose from are UDP and IP.
Additional command line
arguments for PPP
Enter additional command line arguments for PPP here.