AS220V2
2x2 Dual Band 802.11ac Wave 2 Indoor Access Point
User Manual
Page 12
Parameter
Description
Wireless Switch Address 1/2/3/4
Enter wireless access controller IPv4 IP address.
Wireless Switch IPv6 Address1/2/3/4 Enter wireless access controller IPv6 IP address.
Wireless Switch Name1/2/3/4
Enter access controller DNS value.
Management VLAN ID
Enter specific management VLAN ID which is providing
from the Network.
4.2.2.3.
System Log
This page is used to display the system log on the AP. Information on this page is useful for
troubleshooting.
System
4.2.3.
4.2.3.1.
AP Mode
This page is used to displayed and changed AP modes.
•
Thin AP - Specifies to use and configure this AP with a wireless controller in the network. The
wireless controller will be responsible for the configuration of this AP. Only a few functions
are available to be configured on this AP in this mode.
•
Fat AP - Specifies to use and configure this AP without a wireless controller in the network.
More functions are available to be configured on this AP in this mode.
4.2.3.2.
Reboot
Click the Perform reboot link to reboot the device any unsaved configuration.
Fat AP Mode
4.3.
A FAT AP is suitable for family and small-scaled networks and provides full features. This Fat AP
is wireless equipment used to control and manage wireless clients. A FAT AP may support both
2.4GHz and 5GHz band in a single logic management domain. This Fat AP is used for wireless
terminals to access a wired network; also it can communicate the bridge between the wireless
clients and wired network. Before configuring the fat AP make sure that AP is in fat AP mode. If the
AP is in Thin AP mode, please change into Fat AP mode and precede the following essential
configuration.
Содержание AS220V2
Страница 1: ......
