Zcom AS220V2, Руководство пользователя

Страница: 57 / 71

AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual
Page 57
Parameter Description
IPv4 Address Displays the IPv4 address of the associated wireless station.
Signal Displays the signal strength of the associated wireless station.
Noise Displays the wireless signal noise of the associated wireless station.
RX Rate Displays the RX (receiving) wireless data rate of the associated wireless station.
TX Rate
Displays the TX (transmitting) wireless data rate of the associated wireless
station.
4.3.3.3. DHCP and DNS
This page is used to display and configure the DHCP server and DNS settings on the AP.
The following parameters are available in this section:
Parameter Description
Domain required
Select this option to stop forwarding DNS request without the DNS
name.
Authoritative
Select this option to specify that this DHCP server is the only DHCP
server on the local network.
Local server
Enter the domain specification of the local DHCP server here. Names
matching this domain are never forwarded and resolved from DHCP or
host files only.
Local domain
Ener the local domain here. The local domain suffix is appended to
DHCP names and hosts file entries.
Log queries Select this option to write received DNS requests to the syslog.
DNS forwardings
Enter the IP address or domain name of the DNS server to which DNS
requests are forwarded to.
More than one entry can be created.
Rebind protection
Select this option to discard upstream RFC 1918 (Address Allocation
for Private Internets) responses.