Zcom AS220V2, Руководство пользователя

Страница: 11 / 71

AS220V2 2x2 Dual Band 802.11ac Wave 2 Indoor Access Point User Manual
Page 11
Parameter Description
Load Average
Displays the average system load calculated over a given period of time of 1,
5 and 15 minutes.
The following parameters are available in this section:
Parameter Description
Total Available Displays the total memory supported by the AP in kilobytes and percentage.
Free Displays the free memory on the AP in kilobytes and percentage.
Cached Displays the cached memory on the AP in kilobytes and percentage.
Buffered Displays the buffered memory on the AP in kilobytes and percentage.
The following parameters are available in this section:
Parameter Description
IPv4 WAN Status Displays the IPv4 WAN (Wide Area Network) connection status.
Active Connections Displays the number of active network connections in integers and
percentage.
4.2.2.2. General
Next click the General Button. Once login, first assign a fixed IP address or a DHCP IP to the AP
under Current IP Setting. Under Wireless Switch Setting, select Connect with Wireless Switch via IP
and input the IP address of the AP access controller, then click save & apply to take effect.
Parameter Description
ipMod
Displays basic mode information of the ipMod.
IPv4 – Select IPv4 mode.
IPv6 - Select IPv6 mode.
Auto – Auto detected if it is IPv4 or IPv6.
DHCP Client
Choose the DHCP Client, which is Close, or Open by default
it will be Open.
Default Gateway Enter the IPv4 address of the gateway for the interface.
Primary/Secondary DNS Server
Enter primary/secondary DNS server. (if require the second
one)
IPv6 Address Enter the IPv6 address.
IPv6 Prefix Enter the IPv6 prefix IP address.
Default Gateway Enter the IPv6 address of the gateway for the interface.
IPv6 Primary/Secondary DNS Server Enter primary/secondary DNS server. (if require the second
one)
Switch mod
Displays basic information of the switch mod:
Connect with via DHCP – connect the AP via DHCP of the
network or provided by the Access controller DHCP IP
address.
IP – Connect the AP via Access controller IP address.
DNS - Displays the MAC address of the interface.