Zavor LUX LCD Series, Руководство пользователя

Страница: 39 / 124

37
ENGLISH
(1) (2) (3)
(4) (5)
ALWAYS check that the pressure regulator knob and the pressure safety valves
are in good working order before each use.
1. After the unit has cooled, remove the lid from the multi-cooker.
2. Press down and turn the pressure regulator knob counterclockwise past
STEAM to CLEAN and carefully lift to remove. Look through the removed
knob to make sure there is no particle build-up, and put it under running
water to clean.
3. Turn the lid over and place it on a table top. Pull out the anti-blocking case.
Using a brush or toothpick, check and remove any food or foreign particles
that may be lodged in the pressure discharging tube that is located inside
the anti-block cover. Replace the anti-blocking case pressing it down back
into place.
4. Replace the pressure regulator knob by lining the CLEAN dot with the dot
on the lid of the unit and turning clockwise until it goes into place. The dot
on the base of the pressure regulator should line up with the PRESSURE
or STEAM setting on the pressure regulator knob. If it doesn’t, remove the
knob again and try realigning the dots the other way around.