Page - 8/43
AEXZP0BB - ECO SMART DISPLAY - User Manual
Turtle
The turtle symbol (number 3 in figure) is normally off; when it appears (fixed) it
shows activation of the “soft” mode of the truck, in which maximum speed and
acceleration are reduced.
Hour meter
The number displayed on the bottom right side of the unit (number 5 in figure)
shows the Hours Worked.
The letter present over the hour meter (number 4 in figure) shows which hour
meter is displayed:
-
K: the key hour meter is displayed;
-
S: the seat hour meter is displayed;
-
M: the machine hour meter is displayed; it increases if traction or pump
control is working.
Accelerator
The accelerator level indication (number 6 in figure) is displayed on the central
top side of the unit; it is shown by eight notches. When the accelerator level is
minimum only a notch is displayed, when the accelerator level is maximum all the
eight notches are displayed. Each notch represents 1/8 of the difference between
maximum and minimum accelerator level.
Speed
The number displayed under the accelerator notches on the center of the unit
(number 7 in figure) shows the truck speed. The unit can be km/h or mph
depending on the SPEED UNIT parameter setting (see 7.4).
Wheel position and running direction
The notch displayed on the left of the hour meter (number 8 in figure) represents
the wheel (only one of the nine notches is displayed) and shows the steering
angle (it corresponds to the relative truck direction if the truck is running).
The arrow (number 9 in figure) shows the set truck running direction. The arrow
point is up when the truck is forward running; the arrow point is down when the
truck is reverse running. If the truck doesn’t run a dot is displayed instead of the
arrow.
