AEXZP0BB - ECO SMART DISPLAY - User Manual
Page - 7/43
Seat (4)
This led lights when the operator is on the seat.
Handbrake (5)
This led lights when the handbrake is activated.
4
When the Key Switch is closed, the Eco Smart Display makes a general test
lighting and switching off all the LED in sequence.
2.2.2 Display function
Battery’s state of charge
The battery's state of charge indication (number 1 in figure) is displayed on the
left side of the unit; it is shown by ten notches. Each notch represents the 10% of
the battery charge. As the battery becomes discharged, the notches turn off
progressively, one after the other, in proportion to the value of the residual
battery charge. When the residual battery charge is
≤
40 % the notches displayed
start to blink. When BATTERY LOW alarm appears on the traction controller, the
battery symbol which is near the notches also blinks.
Performance
The number which appears in the rectangle displayed in the top right side of the
unit (number 2 in figure) shows the performance mode which is being used in the
controller.
Performances can be scrolled pressing button
W
. When one performance is
selected, the related information will be sent via can-bus to traction and pump
controllers that will manage this data. The standard functioning reduces truck
performance passing from performance mode #4 to performance mode #1.
The real meaning, in terms of parameters level of these performances, depends
on software present on pump and traction controllers:
-
4 corresponds to highest performance;
-
3 corresponds to medium performance;
-
2 corresponds to low performance;
-
1 corresponds to minimum performance.
