ZAGI ZAGI-DC, Инструкция по сборке

Страница: 10 / 19

Spray another mist coat of adhesive on all top surfaces of the wing
including the areas covered with fiber tape. Make sure to spray
the tips and trailing edges. Spray 2 inches of the bottom of the
wing at the TE. Let the adhesive dry for 20 minutes.
Put the wing top side up in the bottom beds. Put a weight on the
left panel to hold it steady while taping. Start taping at the TE and
work forward.
Covering the top and bottom of the wing in contrasting colors
enhances visual orientation. Use the darker color on the bottom
surface. An optional roll of color tape will be required.
Wrap the first strip of tape around the TE from top to the bottom
being careful to follow the shape.
Apply strips of tape working forward from the TE. Overlap each
strip of tape a quarter of an inch. Extend the tape two inches
beyond the center line of the wing. Extend the tape two inches
beyond the tips.
Continue overlapping the strips of tape until the entire top right
wing panel is covered.
Trim the tape that extends beyond the LE.
10