ZAGI ZAGI-DC, Инструкция по сборке

Страница: 9 / 19

Cut the corners of the tape so it can be folded into the electronics
and servo bays.
Place the wing in the top beds and repeat the same procedures
on the bottom side of the wing.
Lay the wing in the bottom beds. Spray a medium mist coat of
adhesive on the top side of the wing. Make sure that the walls of
the electronics bay are covered. Let the adhesive dry for 15
minutes before taping.
The fiber tape will not appear as dark as pictured here. Darker tape was used in
these pictures to enhance contrast visibility.
Apply a piece of fiber filament tape straight across center section
of the wing between the carbon spars.
Apply two pieces of fiber filament tape across the nose. The tape
will partially cover the battery bay. For extreme combat duty,
apply a strip of fiber tape around the leading edge (LE).
Apply a strip of fiber filament tape to the trailing edge (TE). Start at
the tip and cover across to the spar on the opposite wing.
9