ZAGI 400 X ELECTRIC, Инструкция по сборке

Страница: 15 / 22

page 14
(See Figure 16) Punch-out and separate the two nested winglets. Punch-out the 1 1/4" x
1/4" slot in the winglet .
(See Figure 17) Put a piece of fiber filament tape through the slot to the top of the wing
and wrap it around to the bottom of the wing. Add two more pieces of tape to secure the
winglet in place. Make sure that the elevon will not bind against the winglet as it moves.
The winglets are at the very back of the airframe. The tape method of fastening is
both light and strong. If a different winglet fastening system is preferred, keep the
weight down to the weight of three short strips of tape.
Fiber tape
Figure 17
Figure 16