ZAGI 400 X ELECTRIC, Инструкция по сборке

Страница: 12 / 22

(See Figure 13) A strain relief can be made to protect the ESC wires from damage on
impact. Tether the Deans connector on the ESC to the motor wire tie with a length of
dental floss. The tether will unplug the battery on impact rather than pulling wires out of
the ESC.
Caution: The prop SHOULD NOT be installed on the motor at this time.
The speed control could turn on when the battery is plugged in. Attach the red
and blue wires to the motor before the ESC is plugged into the battery.
page 11
Figure 13
Velcro cut-out
Velcro cut-out
Receiver
Deans plug
Speed control
Red wire
Blue wire
Strain relief