ZAGI 400 X ELECTRIC, Инструкция по сборке

Страница: 14 / 22

(See Figure 14) Peel the protective paper off of the hook side of two strips of Velcro. Stick the strips to
the battery 1/2 inch from each end. Press the loop side to the hook side and peel the paper. Press the
battery in place with the sticky side down. Use only two pieces of Velcro on the battery. The battery will
stay seated in the tray and withstand the stresses of flight. On impact however, the battery should be free
enough to eject so that the airframe does not have to absorb the energy. The ESC can be placed on top of
the battery. Do not Velcro the ESC to the battery.
(See Figure 15) Cut one of the squares of Velcro in half. Stick the hook side of one of the small strips of
Velcro to the nose of the motor tray. Stick the hook side of one of the small strips of Velcro to either side of
the back of the motor tray in the cut outs. Put the loop side of the Velcro loop side down on the hook side.
Peel the paper off of the loop side. Place the canopy over the motor tray, nose first. Spread the back end of
the canopy and lower it onto the motor tray. Press the sides over the Velcro to assure that the adhesive is stuck.
(See Figure 15) Align the motor tray with the nose. Make sure that the motor tray is centered over the center
line at the trailing edge. Attach the motor tray with a strip of fiber tape on each side.
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
12345
Tape the tray down
with fiber tape
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
123456
Figure 15
Velcro on either side of
the back of the motor tray
Stick Velcro to the
nose of the motor tray
123456789012345678901234567890121234567890123456789012345
123456789012345678901234567890121234567890123456789012345
123456789012345678901234567890121234567890123456789012345
123456789012345678901234567890121234567890123456789012345
123456789012345678901234567890121234567890123456789012345
123456789012345678901234567890121234567890123456789012345
123456789012345678901234567890121234567890123456789012345
123456789012345678901234567890121234567890123456789012345
123456789012345678901234567890121234567890123456789012345
123456789012345678901234567890121234567890123456789012345
123456789012345678901234567890121234567890123456789012345
123456789012345678901234567890121234567890123456789012345
123456789012345678901234567890121234567890123456789012345
123456789012345678901234567890121234567890123456789012345
123456789012345678901234567890121234567890123456789012345
123456789012345678901234567890121234567890123456789012345
1234567
1234567
1234567
1234567
1234567
1234567
1234567
1234567
1234567
Velcro
Battery
Figure 14
page 13